Water Proofing & Damp Protection

During rains and due to atmospheric damp

ness the building structures gets affected by water seepage.

This can be prevented by the correct layers of plastering material. Normal cement mixture is not capable of curing this problem. The dampness causes the expensive paint to peel off and also brings stale and foul smell in the building. For healthy living we need a clean, dry, and hygienic environment. Vivid provides water proofing coatings, advice and methods to cure water seepage, thermal insulation with roof water proofing of buildings. You can get all solutions for building water proofing at Vivid.

Water proofing steps

 » Remove POP and Cement plastering till Brick wall
 » Clean the Brick Wall with iron brush or cloth
 » Mix Tuffcrete, C-Max, Cement, & water as:
  » Tuffcrete (1 Ltr)
  » C-Max (100 gm)
  » Cement (4 Kg)
  » Water (7 Ltr).
 » Apply 3 coats of the mixture giving suitable curing and drying time after each coat.
 » Apply 1 coat of WS Black Coat mixed in Water.
 » The mixing ratio is Black Coat 1 Ltr and Water 0.8 Ltr.
 » On curing of Black Coat mixture; plaster the wall by adding 1% C-Max to Cement.
 » POP should be done on the wall only after curing.

This will give complete Water Proofing, even if there is a substantial seepage of water in the wall.

Benefits of using Vivid Water Proofing

 » Water seepage protection
 » Damp proofing and protection
 » Longer life for the building structure and paints
 » Reduce atmospheric corrosion
 » Fire and heat protection
 » Provides heat protection in case of fire.
 » The material coating is effective on steel.
 » It increases the melting point of steel frames
 » We recommend its application on the steel rods used in the building